Threaded Wires Save Phone Numbers – Hackaday

If you thought programming your 1990s VCR was rough, wait until you see this Russian telephone autodialer that [Mike] took apart over on the mikeselectricalstuff YouTube channel (video below the break). [Mike] got this 1980s Soviet-era machine a few years ago, and finally got around to breaking into it to learning what makes it tick. The autodialer plugs into the phone line, much like an old-school answering machine. It provides the user with 40 pre-set telephone numbers, arranged in two banks of 20, and a speaker to monitor the connection process. It uses pulse dialing — no touch tones. What’s surprising is how you program the numbers. Given that this was build in the 1980s Soviet Union, he wasn’t expecting a microcontroller. But he wasn’t expecting transformer core “rope” memory, either.

<img data-attachment-id="513872" data-permalink="" data-orig-file="" data-orig-size="844,720" data-comments-opened="1" data-image-meta="{"aperture":"0","credit":"","camera":"","caption":"","created_timestamp":"0","copyright":"","focal_length":"0","iso":"0","shutter_speed":"0","title":"","orientation":"0"}" data-image-title="trill2-programming" data-image-description="

screen capture from Mike’s YouTube video

” data-image-caption data-medium-file=”″ data-large-file=”″ loading=”lazy” class=”wp-image-513872 size-thumbnail alignleft” src=”″ alt width=”250″ height=”213″ srcset=” 844w,,213 250w,,341 400w,,625 733w” sizes=”(max-width: 250px) 100vw, 250px”>

The phone normally sits on a platform on the left side of the machine. Raising up the platform exposes a bank of toroidal cores, arranged in seven rows of four. Each row corresponds to a dialed digit, and the four cores used to encode a single digit. At the top and bottom of the programming board are two 40-pin connectors, each pin corresponding to one of the preset phone numbers. A bunch of patch wires would have been provided, and you program each number by threading a long wire through the appropriate cores, connecting it at the top and bottom connectors much like a modern solderless breadboard. It’s also interesting to see the components and construction technique of this circuit board. For example, the diodes have the strip on the Anode end, not the cathode as we’re normally used to today. The transistor cans are mounted upside down like dead spiders.

<img data-attachment-id="513873" data-permalink="" data-orig-file="" data-orig-size="10223,4912" data-comments-opened="1" data-image-meta="{"aperture":"0","credit":"","camera":"","caption":"","created_timestamp":"0","copyright":"","focal_length":"0","iso":"0","shutter_speed":"0","title":"","orientation":"0"}" data-image-title="trill2-sch-yellow" data-image-description="

scanned schematic posted in the notes on Mike’s YouTube video.

” data-image-caption data-medium-file=”″ data-large-file=”″ loading=”lazy” class=”wp-image-513873 size-large” src=”″ alt width=”800″ height=”384″ srcset=” 10223w,,120 250w,,192 400w,,384 800w,,738 1536w,,984 2048w” sizes=”(max-width: 800px) 100vw, 800px”>

Scanned Schematics (click to see full size)

Mike tries to decipher the schematics and pokes around enough to get the gist of how it works. This design is an interesting solution to the problem of building an autodialer in that era. If you want to learn more about core memory, here’s an article we wrote about deciphering an Apollo rope memory module, perhaps one of the most well-known examples of this technology. We also covered a couple of projects using rope memory techniques but on a small scale, here and here.

[embedded content]

Spread the love

Leave a Reply

Your email address will not be published.